2. Run the water for 15 seconds to clean the sediment and impurities in the pipeline to avoid clogging the valve core.
3. When installing the main body, pay attention to check whether there are 6-point water sealing gaskets. A rag must be used when securing the nut to prevent scratching the surface.
4. Open the water valve, check whether there is water leakage at the curved angle joint, and the water outlet of the main body.
5. When drilling the fixed pole, you must ask the customer whether there are water pipes and wires at the drilling position, so as to avoid breaking the pipeline and causing unnecessary losses.
7. Tighten the pulling screw of the pole to prevent the water pressure from rushing out of the pole and damaging the ceiling of the customer's home.
8. After the installation is completed, it is necessary to check again whether there is water leakage at each interface.
After purchasing a shower, bathtub, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must be 15 cm. Don't forget to flush the water pipe before installation, so as not to cause damage to the faucet due to excessive water quality. If the elbow between the faucet and the wall joint is too long, you can cut off a part of the 4-point end, and remember that the 6-point connection with the faucet cannot be cut randomly. After purchasing a concealed faucet, the valve core of the faucet is generally pre-embedded in the wall.
Moonshower was established in 2006. Specialized in producing a great number of Metal shower head, Concealed shower mixer, Shower Column and Slide Rail with different styles.For more details about the product, please contact us:
Tel :86-0750-3850280
Mobile Phone :+8613923088590
Email :jack.qin@moon-shower.cn